Nissan Fully Adjustable sound BOV/Diverter T9006 GFB
Brand
GO FAST BITS
The GFB Respons TMS T9006 is a direct-fit diverter and blow-off valve upgrade for selected Nissan 1.6 turbo models. It features an adjustable venting bias system so you can set it from quiet recirculation to a stronger atmospheric blow-off sound.
- Direct-fit replacement for the factory diverter valve on listed Nissan models
- Adjustable venting bias to control sound and venting behaviour
- Improves throttle response and boost recovery between shifts
- Clear fitment note for facelift models with electronic diverter valves
- Nissan Juke 1.6 DIG-T (F15) (Series 1) (2010–2014)
Note: Direct fit for pre-facelift and Nismo RS models only. Post facelift (2015–2018) models have an electronic diverter valve and must use DV+ part # T9362 instead. - Nissan Pulsar SSS 1.6 DIG-T (C12) (2013–2017)
- Nissan Juke Nismo RS 1.6 DIG-T (F15) (2014–2018)
Note: Direct fit for pre-facelift and Nismo RS models only. Post facelift (2015–2018) models have an electronic diverter valve and must use DV+ part # T9362 instead.
GFB Respons TMS T9006 Diverter / Blow-Off Valve with Sound Adjustment – Nissan Juke 1.6 DIG-T & Pulsar SSS 1.6T
Direct-Fit Blow-Off / Diverter Valve with Adjustable Venting Bias for Nissan 1.6 Turbo
The GFB Respons TMS T9006 replaces the factory diverter valve on selected Nissan 1.6 turbo vehicles with a stronger, adjustable unit that lets you tune how boost pressure is released when you lift off the throttle.
Adjustable Sound and Venting Behaviour
Instead of being locked into full recirculation (quiet) or full atmosphere venting (loud), the Respons valve lets you dial in the balance between the two. Set it for near-factory operation or open it up for more blow-off sound, depending on your preference.
Sharper Response Between Gear Changes
By controlling boost release efficiently, the valve helps reduce unwanted surge and supports faster boost recovery after shifts for a more responsive driving feel.
True Direct-Fit Design
This is not a universal weld-on valve. The T9006 is designed to fit the factory valve location on the compatible Nissan applications listed below.
Important Note for Facelift Electronic Diverter Models
Some facelift vehicles use an electronic diverter valve. Where noted below, those vehicles require DV+ part # T9362 instead of T9006.
| OEM Part Number | T9006 |
|---|---|
| EAN | 9328022000985 |
| Brand | GO FAST BITS |
| Condition | Brand new |
| Country of Manufacture | Australia |
This Fits:
| Make | Model | Year |
|---|---|---|
| Nissan | Juke | 2010 |
| Nissan | Juke | 2011 |
| Nissan | Juke | 2012 |
| Nissan | Juke | 2013 |
| Nissan | Juke | 2014 |
| Nissan | Juke | 2015 |
| Nissan | Juke | 2016 |
| Nissan | Juke | 2017 |
| Nissan | Juke | 2018 |
| Nissan | Pulsar | 2013 |
| Nissan | Pulsar | 2014 |
| Nissan | Pulsar | 2015 |
| Nissan | Pulsar | 2016 |
| Nissan | Pulsar | 2017 |
Note:
- Nissan Juke 1.6 DIG-T (F15) (Series 1) (2010–2014)
Note: Direct fit for pre-facelift and Nismo RS models only. Post facelift (2015–2018) models have an electronic diverter valve and must use DV+ part # T9362 instead. - Nissan Pulsar SSS 1.6 DIG-T (C12) (2013–2017)
- Nissan Juke Nismo RS 1.6 DIG-T (F15) (2014–2018)
Note: Direct fit for pre-facelift and Nismo RS models only. Post facelift (2015–2018) models have an electronic diverter valve and must use DV+ part # T9362 instead.
WARNING: This item requires professional installation to protect the warranty.
NOTE: Euro Car Electronics offers Installation Australia wide. Call 07 5479 5555 or find installer.
