This Kit Removes the Throttle Valve on the 3.0 TDI Engines

The Original throttle valve acts as a 'Swirl Flap' (usually found in the Inlet Manifold), This kit removes this Valve and Swirl Flap that is in place. These are known to clog up, causing restricted flow/running issues

Includes an M6 tapped hole allowing you to run a boost gauge (fittings to blank the hole and fittings for boost gauge hose also included)

Includes a 1/8NPT Tapped Hole allowing you to run Water Meth Injection (includes a bung to blank this hole if not running WMI)

• CNC Machined Billet Aluminium
• Made in the UK

NOTE: ONCE THE VALVE IS REMOVED, THE VEHICLES ECU WILL NO LONGER GET A SIGNAL FROM THE THROTTLE VALVE CAUSING THE EMISSIONS WORKSHOP LIGHT TO APPEAR ON THE DASHBOARD, THEREFORE, IT WILL NEED TO BE MAPPED OUT IN THE VEHICLES SOFTWARE

THIS KIT WILL FIT THE FOLLOWING VEHICLES:

• All VW Amarok 3.0 TDI V6 Engines with the below Throttle Valve Part Numbers
• Audi A4 / Avant - CSWB (218) CRTC (272)
• Audi A4 / S4 / Avant / quattro - CSWB (218) CRTC (272)
• Audi A5 / S5 Coupe Sport - CSWB (218)
• Audi A6 / Avant - CRTF (211) CZVA (218) CRTE (218) CRTD (272)
• Audi A6 / S6 / Avant / quattro - CRTF (211) CZVA (218) CRTE (218) CRTD (272)
• Audi A6 allroad quattro - CRTF (211) CZVA (218) CRTE (218) CRTD (272)
• Audi A7 Sportback - CZVF (190) CRTF (211) CZVC (211) CZVB (218) CZVA (218) CRTE (218) CRTD (272)
• Audi Q7 - CZZA (218) CZZB (218) CRTE (218) CVMD (249) CUEA (258) CVZA (258) CRTC (272)

REPLACES VW PART NUMBERS:

• 059129593AG
• 059129593S
• 059129593AL

THIS KIT CONSISTS OF:

• 1x CNC Aluminium Throttle Valve Delete Pipe
• 1x M6 90 Degree Push Fit Boost Gauge Fitting
• 1x M6 Vented Grub Screw
• 1x M6 Grub Screw
• 1x 1/8NPT Grub Screw/Plug