5QA919298F – OEM PLA Control Module (Front + Rear + Side, 12 Channels) – VIN-Coded Replacement

Has your Park Assist stopped working? Active parking unavailable, the system refusing to steer into a space, false sensor alerts, OPS display dead on the infotainment screen, or the whole parking system completely down after the last workshop visit? This OEM 5QA919298F control module is the genuine replacement that brings full Park Assist (PLA), OPS and front + rear PDC back to factory accuracy.

Brand-new, genuine OEM module — not used, not dismantled, not aftermarket. Fully working PLA modules are rarely removed unless something has already gone wrong with them, which makes a fresh OEM unit the safer long-term choice.

VIN-coded before shipping

The complicated part is already handled. Send us your VIN and we'll code the module to your vehicle before shipping — so it's a true plug & play replacement. No dealership appointment, no extra programming costs, no second trip anywhere. No additional coding is required when replacing a factory-installed module.

What this module does

This is a Park Assist (PLA / Parklenkassistent) control module — the system that actively steers your car into parallel and perpendicular parking spaces while you control the throttle and brake. To do this it uses 12 ultrasonic channels: 4 front + 4 rear bumper sensors (PDC + OPS) plus 4 side sensors that scan parking spaces as you drive past them.

Why this module

• Genuine OEM part (5QA919298F) – exactly the same module used by the manufacturer, no aftermarket compromises
• 12 channels: 8 bumper + 4 side – full PDC plus PLA scanning sensors
• Park Assist (PLA) ready – active parking guidance, car steers itself into spaces
• OPS-ready – Optical Parking System (graphic display on the infotainment screen) supported
• VIN-coded before shipping – prepared for your vehicle, recognized correctly from the first ignition
• True plug & play – works immediately after installation
• Safer than a used module – used units were almost always removed for a reason
• No dealership visit needed – no service appointments, no extra costs

Vehicle compatibility

Used across multiple VAG models on the MQB platform with factory Park Assist (2015–2020), including:

• Volkswagen Arteon
• Volkswagen Atlas (with Park Assist)
• Volkswagen Golf R (with Park Assist)
• Volkswagen Golf GTI (with Park Assist)
• Volkswagen Golf Alltrack
• Volkswagen Golf SportWagen
• Volkswagen Golf 7.5 Facelift

(This list covers the models we have personally confirmed. Feel free to extend it with what you have verified in your own database.)

Send us your VIN before ordering — we'll confirm whether your car was originally equipped with PLA and pre-code the module for your specific vehicle.

What you receive

• Brand new OEM PDC / OPS / PLA control module 5QA919298F (12-channel)
• Module pre-coded to your VIN
• Installation instructions and video guidance if needed
• Real technical support — no generic answers

Frequently asked questions

What's the difference between PDC, OPS and PLA?
PDC (Park Distance Control) is the basic acoustic warning system. OPS (Optical Parking System) adds a graphic display of obstacle distance on your infotainment screen. PLA (Park Assist / Parklenkassistent) goes one step further — the car actively steers itself into parking spaces while you control the pedals. This module supports all three.

Will this work if my car doesn't have factory PLA?
No — this module needs the matching side sensors, wiring and software activation that came with the factory Park Assist option. If your car originally had only PDC, you need a 5Q0919283 / 5Q0919294 / 5QA919283 / 5QA919294 variant instead. Send us your VIN and we'll point you to the right one.

Does it need coding?
We code it to your VIN before shipping, so no additional coding is required if you're replacing a factory-installed module. Just install it and it works.

Can't find the exact OEM part you're looking for? Contact us — we can often source additional OEM components on request.