Audi Q5 SQ5 8R Highline Rear Camera Controller with Guidance Lines - Genuine OEM 8R0907441A / 4L0907441B

Replace a faulty or damaged factory reversing-camera controller with this Genuine OEM Audi Highline Rear Camera Control Module, part number 8R0907441A with associated reference 4L0907441B.

This electronic control unit processes the signal from the compatible rear-view camera and sends the reversing image to the vehicle's factory MMI display. It also supports compatible parking guidance lines to assist the driver when reversing and manoeuvring.

Product Features

• Genuine OEM Audi and Volkswagen Group component
• Audi part number 8R0907441A
• Alternative part number format 8R0 907 441 A
• Associated module reference 4L0907441B
• Alternative reference format 4L0 907 441 B
• J772 rear-view camera system control module
• Highline reversing-camera controller
• Supports compatible parking guidance-line display
• Suitable for selected Audi Q5 and SQ5 8R models
• Designed for compatible factory MMI infotainment systems
• Original factory connectors and mounting design

Common Symptoms of a Faulty Module

• No reversing-camera image appears on the MMI display
• Camera image is black, distorted or intermittent
• Guidance lines are missing or incorrectly aligned
• Rear-view camera system unavailable warning appears
• Camera image does not activate when reverse gear is selected
• Rear-camera communication or calibration fault codes are stored

Vehicle Compatibility

This control module may be suitable for selected Audi Q5 and SQ5 8R vehicles equipped with a compatible factory Highline reversing-camera and MMI system.

Compatibility can vary depending on the vehicle production year, MMI version, transmission, parking-assistance equipment, camera hardware, software version and electrical connections.

Please compare part number 8R0907441A, reference 4L0907441B, the connectors and all additional identification numbers with the original module before purchasing. Similar-looking camera controllers may contain different software and may not be directly interchangeable.

Coding and Programming Requirements

Coding, vehicle-specific configuration and rear-camera calibration should generally be expected when installing this control module.

The replacement J772 module may require coding or parameterisation to match the vehicle's MMI system, transmission, parking equipment and camera configuration.

Calibration may be required to ensure the reversing-camera image and parking guidance lines are correctly aligned. A diagnostic scan and stored fault-code clearing should also be completed after installation.

A matching used module may communicate with the vehicle after installation, but it should not be considered guaranteed plug-and-play. A complete retrofit into a vehicle without a factory reversing camera will require compatible camera hardware, wiring and infotainment activation.

Installation Information

Professional installation by an Audi technician or experienced automotive infotainment specialist is recommended.

The rear camera, wiring, electrical connectors, module power supply and communication network should be inspected before replacement to confirm that the controller is responsible for the fault.

After installation, the camera system should be coded, calibrated and tested to confirm that the reversing image activates correctly and that the displayed guidance lines are properly aligned.