Audi VW Porsche 7 Speed DSG Transmission Clutch Kit
Replacement Drivetech K1/K2 dual-clutch assembly for compatible DL501 / 0B5 seven-speed S-Tronic and Macan PDK transmissions. For repairs involving worn or slipping clutch packs, take-off shudder and rough clutch engagement. Part number VXK-18000, corresponding to OE reference 0B5 141 030 E. Supplied brand new with a one-year warranty.
For the following applications fitted with a compatible DL501 / 0B5 seven-speed dual-clutch transmission using clutch reference 0B5 141 030 E. Confirm the clutch version by VIN.
- Audi A4 B8 (8K), 2008–2015: selected 2.0 TFSI, 2.0 TDI, 3.0 TDI and 3.0 TFSI quattro applications, including Avant.
- Audi A4 allroad B8 (8KH), 2012–2014: 2.0 TDI quattro, CGLC.
- Audi A5 (8T / 8F), 2009–2016: selected 2.0 TFSI, 2.0 TDI, 3.0 TDI, 3.0 TFSI and 3.2 FSI quattro applications, including Coupe, Sportback and Cabriolet.
- Audi A6 C7 (4G), 2011–2015: selected 2.8 FSI, 3.0 TDI and 3.0 TFSI quattro applications.
- Audi A6 allroad C7 (4GH), 2011–2014: 3.0 TDI quattro, CDUC / CDUD.
- Audi A7 C7 (4G), 2011–2014: selected 3.0 TDI and 3.0 TFSI quattro applications.
- Audi Q5 (8R), 2009–2016: selected 2.0 TDI, 3.0 TDI, 2.0 TFSI and 3.2 FSI quattro applications.
- Audi S4 B8 (8K), 2009–2015: 3.0 TFSI quattro, including Avant.
- Audi S5 (8T / 8F), 2009–2016: 3.0 TFSI quattro, including Coupe, Sportback and Cabriolet.
- Porsche Macan S (95B), 2014–2018: 3.0 V6 twin-turbo petrol, CTMA, with the corresponding seven-speed PDK clutch version.
- -27%
Special Price $1,100.00 Regular Price $1,500.00Audi DL501 Mechatronic Repair Kit Circuit Plates & Solenoids DSG S-Tronic Gearbox Repair Kit OEM
Audi DL501 0B5 Seven-Speed S-Tronic Dual-Clutch Transmission Clutch Kit - Replacement DSG Clutch Assembly
Drivetech DL501 / 0B5 Dual-Clutch Replacement Kit
Restore smooth take-off and positive drive engagement when worn clutch packs cause slipping, shuddering or rough gear changes. The Drivetech VXK-18000 is a replacement K1/K2 dual-clutch assembly for compatible DL501 / 0B5 seven-speed wet dual-clutch transmissions, including Audi S-Tronic and selected Porsche Macan PDK applications.
The assembly contains the two clutch packs that transfer engine torque into the transmission. It provides a replacement for the clutch unit when wear or damage has been identified during gearbox diagnosis.
Symptoms of worn DL501 clutch packs
- Shuddering or juddering when pulling away.
- Clutch slip under acceleration, with engine speed rising faster than road speed.
- Rough or inconsistent clutch engagement during gear changes.
- Reduced drive accompanied by clutch-slip faults.
Relevant Audi DL501 fault codes include P17CF – clutch 1 slippage too high and P17D0 – clutch 2 slippage too high. Clutch replacement addresses these symptoms where diagnosis confirms wear or damage in the clutch assembly.
Product specifications
- Brand: Drivetech
- Part number: VXK-18000
- Transmission: DL501 / 0B5, seven-speed wet dual clutch
- Clutch arrangement: K1 and K2
- OE reference: 0B5 141 030 E / 0B5141030E
- Condition: Brand new
- Warranty: One year
Scope of delivery:
- 1x Drivetech VXK-18000 K1/K2 dual-clutch assembly.
Fitment and installation
Suitable applications are listed below. Match the DL501 / 0B5 transmission and clutch reference 0B5 141 030 E to the vehicle. Provide the VIN when ordering so the correct clutch version can be confirmed.
Installation involves gearbox removal and replacement of the dual-clutch assembly. Complete the transmission-specific setup, fluid filling and diagnostic basic settings / adaptation procedures after fitting.
Frequently asked questions
Does this replace both clutch packs?
Yes. VXK-18000 is the K1/K2 dual-clutch assembly for the corresponding DL501 / 0B5 application.
Will this fit every seven-speed S-Tronic gearbox?
Fitment is specific to the DL501 / 0B5 transmission and the corresponding 0B5 141 030 E clutch version. The VIN and original clutch reference identify the correct application.
Is this the clutch kit or a mechatronic repair kit?
This is the mechanical dual-clutch assembly. Repairs to the mechatronic electronics, circuit plates or solenoids use separate components.
Are basic settings required after clutch replacement?
Yes. The installer needs to complete the gearbox-specific setup and diagnostic basic settings / adaptation procedures after replacing the clutch.
| OEM Part Number | VXK-18000 |
|---|---|
| Supersedes part numbers: | 0B5141030E |
| Brand | Other |
| Condition | Brand new |
This Fits:
| Make | Model | Year |
|---|---|---|
| Audi | A4 | 2008 |
| Audi | A4 | 2009 |
| Audi | A4 | 2010 |
| Audi | A4 | 2011 |
| Audi | A4 | 2012 |
| Audi | A4 | 2013 |
| Audi | A4 | 2014 |
| Audi | A4 | 2015 |
| Audi | A5 | 2009 |
| Audi | A5 | 2010 |
| Audi | A5 | 2011 |
| Audi | A5 | 2012 |
| Audi | A5 | 2013 |
| Audi | A5 | 2014 |
| Audi | A5 | 2015 |
| Audi | A5 | 2016 |
| Audi | A6 | 2011 |
| Audi | A6 | 2012 |
| Audi | A6 | 2013 |
| Audi | A6 | 2014 |
| Audi | A6 | 2015 |
| Audi | A7 | 2011 |
| Audi | A7 | 2012 |
| Audi | A7 | 2013 |
| Audi | A7 | 2014 |
| Audi | Q5 | 2009 |
| Audi | Q5 | 2010 |
| Audi | Q5 | 2011 |
| Audi | Q5 | 2012 |
| Audi | Q5 | 2013 |
| Audi | Q5 | 2014 |
| Audi | Q5 | 2015 |
| Audi | Q5 | 2016 |
| Audi | S4 | 2009 |
| Audi | S4 | 2010 |
| Audi | S4 | 2011 |
| Audi | S4 | 2012 |
| Audi | S4 | 2013 |
| Audi | S4 | 2014 |
| Audi | S4 | 2015 |
| Audi | S5 | 2009 |
| Audi | S5 | 2010 |
| Audi | S5 | 2011 |
| Audi | S5 | 2012 |
| Audi | S5 | 2013 |
| Audi | S5 | 2014 |
| Audi | S5 | 2015 |
| Audi | S5 | 2016 |
| Porsche | Macan | 2014 |
| Porsche | Macan | 2015 |
| Porsche | Macan | 2016 |
| Porsche | Macan | 2017 |
| Porsche | Macan | 2018 |
Note:
For the following applications fitted with a compatible DL501 / 0B5 seven-speed dual-clutch transmission using clutch reference 0B5 141 030 E. Confirm the clutch version by VIN.
- Audi A4 B8 (8K), 2008–2015: selected 2.0 TFSI, 2.0 TDI, 3.0 TDI and 3.0 TFSI quattro applications, including Avant.
- Audi A4 allroad B8 (8KH), 2012–2014: 2.0 TDI quattro, CGLC.
- Audi A5 (8T / 8F), 2009–2016: selected 2.0 TFSI, 2.0 TDI, 3.0 TDI, 3.0 TFSI and 3.2 FSI quattro applications, including Coupe, Sportback and Cabriolet.
- Audi A6 C7 (4G), 2011–2015: selected 2.8 FSI, 3.0 TDI and 3.0 TFSI quattro applications.
- Audi A6 allroad C7 (4GH), 2011–2014: 3.0 TDI quattro, CDUC / CDUD.
- Audi A7 C7 (4G), 2011–2014: selected 3.0 TDI and 3.0 TFSI quattro applications.
- Audi Q5 (8R), 2009–2016: selected 2.0 TDI, 3.0 TDI, 2.0 TFSI and 3.2 FSI quattro applications.
- Audi S4 B8 (8K), 2009–2015: 3.0 TFSI quattro, including Avant.
- Audi S5 (8T / 8F), 2009–2016: 3.0 TFSI quattro, including Coupe, Sportback and Cabriolet.
- Porsche Macan S (95B), 2014–2018: 3.0 V6 twin-turbo petrol, CTMA, with the corresponding seven-speed PDK clutch version.
Installation & Configuration
Professional installation and configuration are available through Euro Car Electronics. If you prefer to have this product professionally fitted, our team can assist with installation and any required vehicle setup.
Enquire about professional installation ↗
IMPORTANT: Some products require professional installation or specific installation procedures. Please review the product information and our Warranty Support & Returns ↗ information before installation.