Auto Hill Hold Start Assist - Wire Harness for AUDI A6 C8 / A7 4K

Special Price $156.81 Regular Price $174.23
Dispatched in 7-14 business days
SKU
CRS.C8.HOLD.WH

Audi A6 C8 / A7 4K Auto Hold Wiring Harness - Retrofit Connection Set

AUDI A6 C8 / A7 4K - Auto Hill Hold Start Assist Harness


Extremely comfortable system into your car.

Your AUDI will automatically stand in place without having to press the brake pedal.


Notes:

Retrofitting the Original Hill Hold / Auto Hold / Hill Start Assist is possible.
Hold button are NOT included in the delivery and are additionally required.


Product description:

You can stand on a slope WITHOUT BRAKE PEDAL, without rolling backwards or forwards.
You can leave the automatic selector lever on D / S and off the brake - the vehicle ALWAYS stays in place without moving - by pressing the accelerator pedal your AUDI will start again immediately (even with the start / stop system switched on).
With manual switches, it is sufficient to operate the clutch when the gear is engaged OR as with automatic models, to operate no pedal at all.
You no longer need to apply the parking brake if you e.g. want to get out of the vehicle shortly etc.
If you park your AUDI you no longer have to use the handbrake - after removing the ignition key (or keystroke on KeylessGo) the engine stops and the parking brake automatically closes (the handbrake activates).
You can activate or deactivate the system at any time by pressing a button on the new button.
A very comfortable special equipment for your AUDI.



Suitable for:
 

  • AUDI A6 C8 / Audi A7 4K



Note:

  • After installation you need to code the system. Please contact an Audi dealer or workshop with diagnostic software.


Scope of delivery:

  • Harness
More Information
Brand Car-Systems
Condition Brand new
Coding required Yes
Write Your Own Review
You're reviewing:Auto Hill Hold Start Assist - Wire Harness for AUDI A6 C8 / A7 4K

This Fits:

Make Model Year
AudiA62018
AudiA62019
AudiA62020
AudiA62021
AudiA62022
AudiA62023
AudiA62024
AudiA62025
AudiA72018
AudiA72019
AudiA72020
AudiA72021
AudiA72022
AudiA72023
AudiA72024
AudiA72025

Note:

There are no notes for this product

 

Installation & Configuration

Professional installation and configuration are available through Euro Car Electronics. If you prefer to have this product professionally fitted, our team can assist with installation and any required vehicle setup.

Enquire about professional installation ↗

Coding is required after installation. Submit a coding enquiry ↗

IMPORTANT: Some products require professional installation or specific installation procedures. Please review the product information and our Warranty Support & Returns ↗ information before installation.
audi a6 c8 / a7 4k auto hold installation wiring, auto hold wiring harness, auto hold installation wiring retrofit, vehicle retrofit connection wiring, audi a6 c8 / a7 4k electronics installation, factory system connection loom, vehicle upgrade wiring