BMW BimmerTech Alpha One UP10 Audio Upgrade

From $4,495.50 Regular Price $4,995.00

To $12,985.50 Regular Price $13,485.00

In stock
SKU
BT-A1-BUNDLE-UP10
Fitting note:

VIN required. The UP10 suits selected BMWs with the later Harman Kardon 688 system and compatible MGU/RAM hardware, typically with iDrive 7 or 8. Enter your VIN so we can confirm the factory audio architecture and the kit for your car.

Harman Kardon 688 appears on both newer RAM-based and earlier optical systems. We use your VIN and equipment to identify the system before ordering. Earlier optical 688 cars are covered by the Lightwave bundle where supported.

We quote any vehicle-specific mounting parts, coding or speaker surcharge after the VIN check and before dispatch.

  • BMW 2 Series Coupé G42, 2021 onwards
  • BMW M2 G87, 2023 onwards
  • BMW 3 Series Sedan G20, 2019–2026
  • BMW 3 Series Touring G21, 2019 onwards
  • BMW M3 Sedan G80, 2021 onwards
  • BMW M3 Touring G81, 2023 onwards
  • BMW 4 Series Coupé G22, 2020 onwards
  • BMW 4 Series Convertible G23, 2021 onwards
  • BMW 4 Series Gran Coupé G26, 2021 onwards
  • BMW i4 G26, 2022 onwards
  • BMW M4 Coupé G82, 2021 onwards
  • BMW M4 Convertible G83, 2021 onwards
  • BMW 5 Series Sedan G30, 2019–2023
  • BMW 5 Series Touring G31, 2019–2020
  • BMW M5 F90, 2019–2023
  • BMW 7 Series G11, 2019–2022
  • BMW 7 Series Long Wheelbase G12, 2019–2022
  • BMW 8 Series Convertible G14, 2019–2025
  • BMW 8 Series Coupé G15, 2019–2025
  • BMW 8 Series Gran Coupé G16, 2019–2025
  • BMW M8 Gran Coupé F93, 2023–2025
  • BMW X3 G01, 2019–2024
  • BMW X3 M F97, 2021–2024
  • BMW X4 G02, 2019–2025
  • BMW X4 M F98, 2021–2025
  • BMW X5 G05, 2018–2026
  • BMW X5 M F95, 2020 onwards
  • BMW X6 G06, 2019 onwards
  • BMW X6 M F96, 2020 onwards
  • BMW X7 G07, 2019 onwards
  • BMW Z4 G29, 2019–2026
Read full fitment details

Hear more of the mix at higher volumes, with clearer vocals and tighter bass on busy tracks. Pair the BimmerTech Alpha One UP10 amplifier with your choice of speaker upgrade.

  • Ten amplified channels and an 11-channel DSP for supported Harman Kardon 688 MGU/RAM systems.
  • Choose Woofer, Front & Woofer or Complete Speaker Set. Add the powered SUB10 for deeper bass.
  • Enter your VIN with your order. We confirm the kit and quote any vehicle-specific extras before dispatch.
You may also like
Customize BMW BimmerTech Alpha One UP10 Audio Upgrade
1 x UP10 Amplifier   + $0.00

Maximum 18 characters

* Required Fields

Your Customization
BimmerTech Alpha One UP10 Amplifier & Speaker Bundle for BMW Harman Kardon 688 - Euro Car Upgrades - eurocarupgrades.com.au
BMW BimmerTech Alpha One UP10 Audio Upgrade

In stock

$4,495.50

Summary

    BimmerTech Alpha One UP10 Amplifier & Speaker Bundle for BMW Harman Kardon 688

    Get more out of the Harman Kardon system already in your BMW. The Alpha One UP10 gives the later 688 system ten channels of amplification and a tune matched to the cabin. Listen for a more defined vocal, a tighter kick drum and more room for the different parts of a busy track, while keeping your factory iDrive controls.

    • Factory audio fit – Selected BMWs with later Harman Kardon (688) and compatible MGU/RAM hardware, typically iDrive 7 or 8. We confirm the audio hardware from your VIN.
    • Build your system – choose the Woofer Set, Front & Woofer Set or Complete Speaker Set. Add the SUB10 for deeper bass.
    • Order with your VIN – after purchase, we confirm the exact kit and quote any vehicle-specific mounting parts, coding or speaker surcharge before dispatch.

    Alpha One UP10 | Built for later Harman Kardon 688

    The UP10 is built around the later Harman Kardon layout with a Receiver Audio Module (RAM). It gives the cabin speakers and factory-location woofers dedicated amplified outputs, with separate tuning for their different jobs. The two higher-power woofer channels supply the punch underneath the mix while the rest of the system handles voices and instruments.

    BimmerTech configures the DSP for your BMW and the selected speakers. Time alignment helps bring the soundstage towards the dash. Equalisation and crossover settings balance the drivers so a low note has weight and you can still follow the vocal above it. The vehicle-matched harness integrates the upgrade with the factory infotainment system.

    • Ten amplified outputs and an 11-channel DSP.
    • Eight channels rated at 65 W RMS each into 4 ohms, plus two woofer channels rated at 160 W RMS each into 2 ohms.
    • RCA pre-out for the optional powered SUB10.
    BimmerTech Alpha One UP10 DSP amplifier

    Choose your Alpha One speaker set

    Choose by where you want to hear the improvement. All three sets include the factory-location woofer pair. The front and complete sets build on that pair with speakers matched to more positions in the cabin.

    Alpha One pair of factory-location woofers

    Woofer Set

    More punch from the factory woofer locations. Replace the factory woofer pair and keep the cabin speakers. Pick this if you’re happy with voices and instruments and want more weight behind the bass guitar and kick drum.

    Alpha One front speakers and factory-location woofers

    Front & Woofer Set

    Clearer sound from the front seats. Adds the supported front midrange speakers and tweeters to the woofer pair. Pick this if you mainly listen from the front and want vocals to come through more clearly, with tighter bass underneath.

    Alpha One complete cabin speaker set with woofers

    Complete Speaker Set

    A consistent sound through the cabin. Upgrades the woofers and the supported cabin speakers, including rear and centre positions where fitted. Pick this if you want the fullest upgrade and regularly carry passengers in the back.

    Example BMW cabin showing front, centre, rear and underseat speaker positions

    Speakers matched to your cabin

    BMW and MINI use different speaker layouts across body styles and factory audio packages. The diagram and kit photos show example layouts. When we check your VIN, we match the driver types, quantities and mounting hardware to the positions your car actually has. Some builds can also take front tweeters with the correct trim or grilles.

    Optional Alpha One SUB10 | Deep bass with a removable boot enclosure

    The factory-location woofers bring weight and impact to drums and bass guitar. Add the SUB10 if you want to feel the lowest notes in electronic tracks, hip-hop or music with sustained bass. It gives those notes a dedicated 10-inch driver and more room to move air in a sealed enclosure.

    The SUB10 has its own built-in monoblock amplifier and comes with the wiring to connect it. BimmerTech rates the driver at 300 W RMS and pairs it with a factory-set monoblock capable of 900 W RMS. The system can be tuned so the SUB10 fills in the bottom end and blends with the woofers already in the cabin.

    The compact enclosure is made from CNC-machined MDF and finished in soft-touch fabric. Quick-disconnect power, RCA and remote connections let you lift it out when you need the boot for luggage, then reconnect it when you want the bass back.

    Which should I choose? Start with the woofer upgrade if you want more punch while keeping the boot clear. Add the SUB10 to any of the three sets if deep bass is a priority, including when you select the Complete Speaker Set.

    BimmerTech Alpha One SUB10 powered 10-inch boot subwoofer

    Scope of delivery

    • Alpha One UP10 DSP amplifier with the harness and mounting hardware specified for the amplifier kit.
    • BimmerTech DSP tune matched to the car and speaker configuration.
    • Your selected Alpha One speaker set, with the exact drivers and quantities confirmed by VIN.
    • Alpha One SUB10 powered enclosure and wiring when the subwoofer option is selected.

    Vehicle-specific parts and pricing. After you order, we check your VIN against the factory audio setup and selected speaker set. We quote any additional speaker mounting parts, wiring, trim, coding or speaker surcharge for approval before dispatch. Installation is separate from the parts purchase.

    Watch an example installation

    Watch a later Harman Kardon installation on the BMW 3 Series G20 and M3 G80. It shows how the amplifier and harness integrate with the factory system. Access and mounting vary by chassis.

    Frequently Asked Questions

    My BMW has Harman Kardon 688. Does it take the UP10?

    It needs the supported later MGU/RAM configuration. BMW used the same 688 option code on earlier fibre-optic systems, so we confirm the hardware from your VIN.

    Does iDrive 7 or 8 by itself confirm fitment?

    The iDrive version is one clue. We also check the audio option, receiver and factory amplifier configuration for your build.

    Can I keep the factory Harman Kardon door speakers?

    Choose Woofer Set to replace the underseat woofers and retain the compatible factory cabin drivers. We match the tune to that upgrade. Front & Woofer Set and Complete Speaker Set replace more of the cabin speakers.

    Will this work with the Bowers & Wilkins system?

    This package is for supported factory Harman Kardon 688 equipment. The Bowers & Wilkins system has different hardware and falls outside this package.

    What happens after I place the order?

    We review your VIN and speaker choice, confirm the factory audio and build the matching parts list. We contact you with any extra parts or price difference for approval before dispatch.

    How many speakers come with my set?

    The Woofer Set is the underseat pair. Front & Woofer adds the supported front positions. Complete covers the supported front and rear cabin positions and can include a centre speaker. We confirm the exact positions, drivers and count after checking your VIN.

    What’s the difference between underseat woofers and the SUB10?

    Underseat woofers use the factory locations to fill out the lower end and blend with the cabin speakers. The SUB10 is a separate powered enclosure in the boot for deeper bass. Choose it alongside any supported speaker set.

    Do I need the SUB10 to get more bass?

    The amplifier and underseat pair are a complete upgrade on their own. Add the SUB10 if you want stronger low bass and have space for a separate boot enclosure.

    Will I keep my factory display and steering wheel controls?

    The upgrade keeps the factory infotainment system in place. You continue to use its usual audio controls. We check the factory audio layout and any coding requirements before supply.

    What parts could be quoted separately?

    Some vehicles need speaker brackets, tweeter grilles or trim, wiring or additional coding. We check what the selected speaker layout needs and quote the vehicle-specific extras before dispatch.

    Can the speaker price change after I order?

    Yes. The price shown covers the configuration selected on the page. If the VIN calls for more or different drivers, we’ll quote any speaker surcharge for your approval before dispatch.

    Will my car need coding?

    It depends on the original equipment. Some builds need audio coding or an Active Sound Design change. We’ll confirm the work required for your vehicle and include any separate cost in the post-order quote.

    Can I install this myself?

    The amplifier uses a vehicle-matched installation kit. A speaker upgrade can involve removing door trims, accessing the underseat locations and changing mounting parts. Installation takes place separately from the parts purchase.

    Will the subwoofer take up boot space?

    Yes. The SUB10 is a separate boot enclosure. Its quick-disconnect power, signal and remote connections let you remove the enclosure when you need the space and reconnect it when you’re ready.

    Can I upgrade the rest of the speakers later?

    Yes, subject to kit availability for your VIN. Start with the underseat pair, then confirm compatible front or rear drivers and the DSP tune before expanding the system.

    What if my car already has an aftermarket amplifier or speakers?

    Tell us what’s installed when we contact you about the order. The supplied harness and DSP tune are matched to a known layout, so we may need the existing equipment details before confirming the kit.

    Does the installation video show the exact kit I will receive?

    It shows one factory configuration and is a useful guide to what the work can involve. Your VIN determines the specific brackets, wiring, driver positions and fitting instructions.

    Is the kit supplied as a BMW or MINI genuine part?

    Alpha One is BimmerTech aftermarket hardware designed to integrate with supported BMW and MINI audio systems.

    Write Your Own Review
    You're reviewing:BMW BimmerTech Alpha One UP10 Audio Upgrade

    This Fits:

    Make Model Year

    Note:

    VIN required. The UP10 suits selected BMWs with the later Harman Kardon 688 system and compatible MGU/RAM hardware, typically with iDrive 7 or 8. Enter your VIN so we can confirm the factory audio architecture and the kit for your car.

    Harman Kardon 688 appears on both newer RAM-based and earlier optical systems. We use your VIN and equipment to identify the system before ordering. Earlier optical 688 cars are covered by the Lightwave bundle where supported.

    We quote any vehicle-specific mounting parts, coding or speaker surcharge after the VIN check and before dispatch.

    • BMW 2 Series Coupé G42, 2021 onwards
    • BMW M2 G87, 2023 onwards
    • BMW 3 Series Sedan G20, 2019–2026
    • BMW 3 Series Touring G21, 2019 onwards
    • BMW M3 Sedan G80, 2021 onwards
    • BMW M3 Touring G81, 2023 onwards
    • BMW 4 Series Coupé G22, 2020 onwards
    • BMW 4 Series Convertible G23, 2021 onwards
    • BMW 4 Series Gran Coupé G26, 2021 onwards
    • BMW i4 G26, 2022 onwards
    • BMW M4 Coupé G82, 2021 onwards
    • BMW M4 Convertible G83, 2021 onwards
    • BMW 5 Series Sedan G30, 2019–2023
    • BMW 5 Series Touring G31, 2019–2020
    • BMW M5 F90, 2019–2023
    • BMW 7 Series G11, 2019–2022
    • BMW 7 Series Long Wheelbase G12, 2019–2022
    • BMW 8 Series Convertible G14, 2019–2025
    • BMW 8 Series Coupé G15, 2019–2025
    • BMW 8 Series Gran Coupé G16, 2019–2025
    • BMW M8 Gran Coupé F93, 2023–2025
    • BMW X3 G01, 2019–2024
    • BMW X3 M F97, 2021–2024
    • BMW X4 G02, 2019–2025
    • BMW X4 M F98, 2021–2025
    • BMW X5 G05, 2018–2026
    • BMW X5 M F95, 2020 onwards
    • BMW X6 G06, 2019 onwards
    • BMW X6 M F96, 2020 onwards
    • BMW X7 G07, 2019 onwards
    • BMW Z4 G29, 2019–2026

     

    Installation & Configuration

    Professional installation and configuration are available through Euro Car Electronics. If you prefer to have this product professionally fitted, our team can assist with installation and any required vehicle setup.

    Enquire about professional installation ↗

    IMPORTANT: Some products require professional installation or specific installation procedures. Please review the product information and our Warranty Support & Returns ↗ information before installation.
    BMW Harman Kardon 688 upgrade; MGU RAM amplifier; BMW iDrive 7 HK amp; BMW iDrive 8 sound upgrade; Alpha One UP10; BMW HK speaker kit; G20 G80 Harman Kardon upgrade; BMW powered subwoofer