Swirl Flap Delete Kit for BMW 4 Cylinder M47N / M47N2 Engines with 22mm OR 33mm Swirl Flap Size

This kit removes the problematic swirl flaps that are known to degrade and eventually disintegrate. This then ends up being sucked into the engine, most of the time with dire consequences.

It is extremely difficuilt to 100% guarantee the correct size swirl flaps WITHOUT measuring them

The 22mm Swirl Flaps are usually applicable on Vehicles UP TO 2004
Vehicles from 2004 - 2006 can have 22mm OR 33mm fitted
2006 Onwards usually have the 33mm Swirl Flaps
This is a Guideline Only

As stated previously, we ar UNABLE to 100% guarantee, even with your inlet manifold part number, which size Swirl Flaps your vehicle will have. By ordering this kit you are confirming that you have measured the size of the Swirl Flaps on your Vehicle

Scope of deliverzŁ

• 4x Swirl Flap Covers
• 4x Seals for Inlet Manifold
• 4x Seals for Head
• 1x Seal for Inlet to EGR Valve

PLEASE NOTE: We require Swirl Flap Measurement to guarantee correct fitment. If you DO NOT measure your Swirl Flap Size you could end up with the WRONG part.