VW Golf 8 - Complete Set Blind Spot Sensor Park Assist

Complete set for upgrading the blind spot sensor with Park Assist

• Please provide VIN / Chasiss number in order to check compability - recommended

Intelligent technology to monitor the blind spot and the traffic situation behind the vehicle.
Warning of approaching vehicles in the detection area.
Radar sensors right and left in the rear bumper detect an area of about 20 meters behind the vehicle.
The blind spot on the right and left side of the vehicle at a speed of about 15 km/h
distance measuring system and the speed difference to other vehicles.
Indicator lights on the outside of glasses mirror warn of critical situations.
Integrated Parking Assist supported during reverse parking in the parking boxes and shunting.

Scope of Delivery:

• Harness

• 1x Radar sensor slave
  

• 1x Radar sensor master
  

• 2x Holders
  

• 2x Primed Mirror Caps

• 2x Warning Display

Notes:

• After installation, VCDS or VAG coding is required
  - please contact your dealer or VW specialist workshop with diagnostic software

• Control Unit must be unlocked for a limited time before coding. This must be done by a workshop with valid GEKO access
• Custom made product, non-refundable

WARNING:

Please note vehicles starting with model year 2024s
with installed PR number NI8 (NI8 = Without UNECE CS (R155) and SU (R156) with SFD2-SG)
or installed PR number NI7 (NI7 = With UNECE CS (R155) without SU (R156))
or installed PR number NI9 (NI9 = With UNECE CS&SU)
or installed PR number NI1 (NI1 = With UNECE CS&SU).

Unfortunately, it can be that these models cannot be retrofit or activated at this time.
Please take this information into consideration before purchasing and contact us providing the VIN to check.

Contact us:

+48 600 369 000     

support@carsystems.eu