AUDI A5 F5 / Q2 GA front camera & lane assist - wire harness

AUDI A5 F5 and Q2 GA with the original front-mounted camera - retrofitting harness
for the original camera in the windscreen (lane assist).
AUDI warns you when leaving the lane and shows you the current speed limit.
 

Here with the following original functions can be retrofitted:

• High-beam assistant FLA
• Lane assist
• Traffic sign recognition VZE
• Dynamic high beam (if supported by the headlamps)

For mounting in your AUDI, a new windshield with bracket
for the front-mounted camera is also required.
All other necessary original parts (for example, steering column lever,
front-mounted camera, possibly necessary gateway, etc.) are NOT included
in the delivery and are additionally required.

Suitable for: 

• AUDI A5 F5
• AUDI Q2 GA

Note:

• After installation you need to code the system. Please contact an Audi dealer or workshop with diagnostic software.

Scope of delivery:

• Wiring Harness Set

WARNING:

Please note the exclusion for vehicles from model year 2024 onwards
with installed PR number NI8 (NI8 = Without UNECE CS (R155) and SU (R156) with SFD2-SG)
or installed PR number NI7 (NI7 = With UNECE CS (R155) without SU (R156))
or installed PR number NI9 (NI9 = With UNECE CS&SU)
or installed PR number NI1 (NI1 = With UNECE CS&SU).

Unfortunately, it can be that these models cannot be retrofit or activated at this time.
Please take this information into consideration before purchasing and contact us providing the VIN to check.

Contact us:

+48 600 369 000     

support@carsystems.eu