The Induction Technology Group (ITG) "Pro-Filter" is a high grade direct replacement filter for your vehicle. These drop-in filters are designed to fit inside your factory air-box and are suitable for road or competition use.

The Pro-Filter utilizes the same three layer Reticulated polyester foam used on the MAXOGEN air filters. The three layers of foam selected for the Pro-Filter combined with the arresting stickiness of the dust retaining oil, give a high level of filtration to protect the engine from all the damaging particles in the ambient air stream.

Unlike some of the competition, ITG filters have a massive dust load-up tolerance, which is the ability to absorb a large amount of dust without reducing air flow capacity.

The design, skill and technology employed to bring this filter to production are superior to all other filter makes, and yet the price is still competitive. The wealth of design skill available at ITG has created the lightest, most capable filters in all fields of motorsport from Formula 1 to the World Rally Championship. The Pro-Filter range receives this same attention to detail at the design stage and is then taken into production with the consummate quality for which ITG is renowned.

Specifics & features:

• Designed to increase horsepower and rate of acceleration
• Can be easily cleaned, re-oiled and used again
• Exceptional filtration – High air flow with three layers of foam.
• Lasts up to 80,000 kilometres before cleaning is required depending on driving conditions (debris should be cleaned away every 30,000)
• Direct replacement - fits in an original manufacturer air-box
• Will NOT void vehicle warranty
• Lifetime warranty on all replacement and performance road use filters (to original purchaser with proof of purchase)
• Dimensions x 2 (270/275 x 195/142mm) & (250/235 x 210/172mm)

Scope of delivery:

• 2 x ITG Pro-Filter air filter replacement element HMP-732

Why choose foam?

Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria:

• Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure.
• Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air.
• Dust load-up tolerance: the capability to absorb a large amount of dust without reducing airflow capacity.

This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.

Euro Car Upgrades offers diagnostics, installation & coding in Maroochydore on the Sunshine Coast QLD and Australia wide