Rear High Line Camera Wiring Harness for VW ID.3
Brand
Car-Systems
VW ID.3 - Rear High Line Camera Wiring Harness
Suitable for ID.3
- Showing the rear area in the Headunit screen
- Automatic display switch by rear gear
- Much easier orientation due to the guidance lines and fields which are integrated into the video picture and change depending on the steering wheel angle
- For cameras in emblem: 1EA980556E / 1EA980556F / 1EA980556G / 1EA980556H
Scope of delivery:
- Wiring / Harness
- Drain Tube
WARNING:
Please note vehicles starting with model year 2024
with installed PR number NI8 (NI8 = Without UNECE CS (R155) and SU (R156) with SFD2-SG)
or installed PR number NI7 (NI7 = With UNECE CS (R155) without SU (R156))
or installed PR number NI9 (NI9 = With UNECE CS&SU)
or installed PR number NI1 (NI1 = With UNECE CS&SU).
Unfortunately, it can be that these models cannot be retrofit or activated at this time.
Please take this information into consideration before purchasing and contact us providing the VIN to check.
| EAN | 5906146000186 |
|---|---|
| Brand | Car-Systems |
| Condition | Brand new |
This Fits:
| Make | Model | Year |
|---|---|---|
| Volkswagen | ID.3 | 2019 |
| Volkswagen | ID.3 | 2020 |
| Volkswagen | ID.3 | 2021 |
| Volkswagen | ID.3 | 2022 |
| Volkswagen | ID.3 | 2023 |
| Volkswagen | ID.3 | 2024 |
| Volkswagen | ID.3 | 2025 |
| Volkswagen | ID.3 | 2026 |
Note:
Installation & Configuration
Professional installation and configuration are available through Euro Car Electronics. If you prefer to have this product professionally fitted, our team can assist with installation and any required vehicle setup.
Enquire about professional installation ↗
IMPORTANT: Some products require professional installation or specific installation procedures. Please review the product information and our Warranty Support & Returns ↗ information before installation.