Performance ITG Profilter Air Filter Audi A4 B6 B7 OEM WB-482 Genuine

Brand

ITG ITG
$165.00
1 in stock.
SKU
WB-482

Replacement Air Filter Element (WB-482)

The ITG Profilter is a high-grade direct replacement performance filter for your vehicle. Designed as a direct replacement filters to fit inside your factory air box and are suitable for every day or competition use.

 

Features:

  • Tri-Foam system - designed to protect your air flow meter
  • Perfect fit - Directly replaces the air filter in your airbox
  • 30% more airflow over a standard paper air filter
  • Longer lifespan before cleaning required over cotton
  • Easy cleaning, no dirt caught like with V shaped filter grooves
  • Bench tested for improved fuel economy, power and torque outputs
  • Lifetime warranty on all replacement and performance road use filters

Search terms: RA112M700101 RV112M700100 ITG Pro-Filter WB-482

Fitting note:

Fits Audi A4 B6/B7 with following engines:

  • 1.8 T
  • 1.9 TDI
  • 2.0 TFSI
  • 2.0 TDI
  • 2.4 V6
  • 2.5 TDI V6
  • 2.7 TDI
  • 3.0 TDI V6
  • 3.0 V6
  • 3.2

Performance ITG Profilter Air Filter Audi A4 B6 B7 OEM WB-482 Genuine

ITG replacement air filter element Audi A4 B6 B7 OEM WB-482 Genuine

The ITG Profilter is a high-grade direct replacement performance filter for your vehicle. Designed as a direct replacement filters to fit inside your factory air box and are suitable for every day or competition use.

 

Features:

  • Tri-Foam system - designed to protect your air flow meter
  • Perfect fit - Directly replaces the air filter in your airbox
  • 30% more airflow over a standard paper air filter
  • Longer lifespan before cleaning required over cotton
  • Easy cleaning, no dirt caught like with V shaped filter grooves
  • Bench tested for improved fuel economy, power and torque outputs
  • Lifetime warranty on all replacement and performance road use filters

Scope of delivery:

  • 1x ITG replacement air filter element Audi A4 B6 B7 WB-482

 

Why choose foam?

Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria:

  • Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure.
  • Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air.
  • Dust load-up tolerance: the capability to absorb a large amount of dust without reducing airflow capacity.

This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.

Three layer foam system in details:

ITG Profilter Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filters surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance.

The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.

  1. Stainless steel wire mesh
    To avoid erosion, only the highest quality steel is used.
  2. Course outer layer:
    Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.
  3. Medium grade middle layer:
    This second filtration layer traps most of the harmful dirt that leads to engine damage.
  4. Fine inner layer:
    Extracts fine particles while allowing full air flow to the engine for maximum power.
Revo ProPanel three layer foam system

Euro Car Upgrades offers diagnostics, installation & coding in Maroochydore on the Sunshine Coast QLD 54795555 and Australia wide.

Search terms: RA112M700101 RV112M700100 ITG Pro-Filter WB-482

More Information
OEM Part Number WB-482
Brand ITG
Condition Brand new
Country of Manufacture United Kingdom
Bay 2
Rack 1
Shelf 2
Write Your Own Review
You're reviewing:Performance ITG Profilter Air Filter Audi A4 B6 B7 OEM WB-482 Genuine

This Fits:

Make Model Year

Note:

Fits Audi A4 B6/B7 with following engines:

  • 1.8 T
  • 1.9 TDI
  • 2.0 TFSI
  • 2.0 TDI
  • 2.4 V6
  • 2.5 TDI V6
  • 2.7 TDI
  • 3.0 TDI V6
  • 3.0 V6
  • 3.2

 

WARNING: This item requires professional installation to protect the warranty.
NOTE: Euro Car Electronics offers Installation Australia wide. Call 07 5479 5555 or find installer.
Performance ITG Profilter Air Filter Audi A4 B6 B7 OEM WB-482 Genuine