VW Transporter T5 T6 Lane Change Assist Side Assist Radar OEM 7E0907568C
Replace a compatible driver-assistance radar with this OEM Volkswagen Transporter T5 and T6 Lane Change Assist and Side Assist Module, part number 7E0907568C. Please confirm the installation side, software version and original part number before ordering. Coding, basic settings and radar calibration may be required.
VW Transporter T5 T6 Lane Change Assist Side Assist Radar OEM 7E0907568C
VW Transporter T5 T6 Lane Change Assist Side Assist Radar - OEM 7E0907568C
Replace a faulty or damaged lane change assistance radar with this OEM Volkswagen control module, part number 7E0907568C.
This radar module is used by compatible Volkswagen Side Assist and blind spot monitoring systems to monitor traffic approaching from behind or travelling beside the vehicle.
Product Features
- OEM Volkswagen driver-assistance component
- Volkswagen part number 7E0907568C
- Alternative part number format 7E0 907 568 C
- Lane change assist and Side Assist radar module
- Blind spot monitoring control unit
- Suitable for selected Volkswagen Transporter T5 and T6 models
- May suit selected Multivan and Caravelle configurations
- Designed for compatible factory driver-assistance systems
- Original factory connector and mounting design
Common Symptoms of a Faulty Radar Module
- Side Assist unavailable warning displayed
- Blind spot warning indicators do not operate
- Lane change assistance switches off
- Intermittent driver-assistance warnings
- Radar communication or calibration fault codes
Vehicle Compatibility
This radar module may be suitable for selected Volkswagen Transporter T5 and T6 vehicles equipped with a compatible factory Side Assist or lane change assistance system.
Compatibility can vary depending on the vehicle production year, installation side, software version, factory equipment and the corresponding radar module fitted to the opposite side of the vehicle.
Please compare part number 7E0907568C, the electrical connector, mounting points and all additional identification numbers with the original module before purchasing.
Coding and Programming Requirements
Coding, parameterisation, system adaptation and radar calibration should generally be expected when installing this module, particularly when fitting a new or used unit from another vehicle.
Volkswagen-compatible diagnostic equipment may be required to complete the replacement procedure, basic settings, calibration and diagnostic fault-code clearing.
This safety-related driver-assistance module should not be considered guaranteed plug-and-play, even when the replacement carries the same part number.
Installation Information
Professional installation by a Volkswagen technician or qualified driver-assistance system specialist is recommended.
The radar mounting bracket, rear bumper area, wiring and electrical connector should be inspected for impact damage, corrosion, water entry or incorrect alignment before installation.
The complete Side Assist system should be diagnostically tested and calibrated after installation to confirm accurate operation.
| OEM Part Number | 7E0907568C |
|---|---|
| Brand | Volkswagen AG |
| Condition | Remanufactured |
| Installation time (h) | 1 |
| Coding required | Yes |
| Country of Manufacture | Germany |
| Rack | 1 |
| Shelf | 3 |
| Shelf side | Back |
This Fits:
| Make | Model | Year |
|---|
Note:
WARNING: This item requires professional installation to protect the warranty.
NOTE: Euro Car Electronics offers Installation Australia wide. Call 07 5479 5555 or find installer.