VW Transporter T6 Left Lane Change Assist Side Assist Radar - OEM 7E0907566C

Replace a faulty or damaged driver-assistance radar with this OEM Volkswagen control module, part number 7E0907566C.

This left rear master radar module is used by compatible Volkswagen lane change assist, Side Assist and blind spot monitoring systems to detect vehicles approaching from behind or travelling beside the vehicle.

Product Features

• OEM Volkswagen driver-assistance component
• Volkswagen part number 7E0907566C
• Alternative part number format 7E0 907 566 C
• Left-side master lane change assist control unit
• Rear radar for compatible Side Assist systems
• Supports compatible blind spot monitoring functions
• Suitable for selected Volkswagen Transporter T6 models
• May suit selected Volkswagen Multivan and Caravelle T6 models
• Original factory connector and mounting design

Common Symptoms of a Faulty Radar

• Side Assist unavailable warning displayed
• Blind spot warning indicators do not operate
• Lane change assistance system switches off
• Intermittent driver-assistance warnings
• Radar communication or calibration fault codes
• Rear cross-traffic functions do not operate correctly

Vehicle Compatibility

This radar module may be suitable for selected Volkswagen Transporter, Multivan and Caravelle T6 vehicles equipped with a compatible factory lane change assist or Side Assist system.

Compatibility can vary depending on the vehicle production date, installation side, software version, factory equipment and the corresponding radar fitted to the opposite side of the vehicle.

Please compare part number 7E0907566C, the electrical connector, mounting points and all additional identification numbers with the original module before purchasing.

Coding and Programming Requirements

Coding, parameterisation and radar calibration should generally be expected when installing this control module.

This part is the left-side master module and may require activation, vehicle-specific coding, software configuration, basic settings and calibration using Volkswagen-compatible diagnostic equipment.

An exact matching used module may communicate with the vehicle after installation, but it should not be considered guaranteed plug-and-play. A diagnostic scan and fault-code clearing should be completed after installation.

Installation Information

Professional installation by a Volkswagen technician or qualified driver-assistance system specialist is recommended.

The radar mounting bracket, rear bumper, wiring and electrical connector should be inspected for impact damage, corrosion, water entry or incorrect alignment before installation.

The complete Side Assist system should be diagnostically tested and calibrated after installation to confirm accurate and safe operation.