This quality ITG Maxogen cold air intake kit  uses a pre-oiled conical foam filter housed in a high quality aluminium airbox. The increased surface area of the filter greatly improves the flow and filtration characteristics of the induction system, providing gains in power, torque, throttle response and induction noise. Dyno testing has showed the ITG Maxogen kit to produce up to 10hp across the rev range at the same time giving the engine a purposeful growl without being too loud.

Scope of delivery:

• 1x Alloy airbox
• 1x Heatshield
• 1x ITG Pro-Filter canonical air filter replacement element

Why choose foam?

Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria:

• Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure.
• Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air.
• Dust load-up tolerance: the capability to absorb a large amount of dust without reducing airflow capacity.

This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.

Three layer foam system in details:

ITG Pro-Filter series filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filters surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance.

The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.

1. Stainless steel wire mesh
   To avoid erosion, only the highest quality steel is used.
2. Course outer layer:
   Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.
3. Medium grade middle layer:
   This second filtration layer traps most of the harmful dirt that leads to engine damage.
4. Fine inner layer:
   Extracts fine particles while allowing full air flow to the engine for maximum power.

Euro Car Upgrades offers diagnostics, installation & coding in Maroochydore on the Sunshine Coast QLD and Australia wide