This kit replaces the EGR Valve. This can be used if you are wanting to remove the Anti Shudder Valve (ASV) or if the vehicle isn't fitted with one

Our EGR Delete Kit is machined from a Single Billet so there are no welds. This improves appearance and also strength

Our unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost guage from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install.

As our design is almost exactly the same profile as the standard EGR Valve, which allows all the stock fixings to be used

• Reduces inlet air temperatures = more power
• Prevents inlet and turbo from clogging up
• Brushed aluminium finish
• Machined from one single piece to prevent cracking
• Made in the UK

KIT OPTIONS:

• EGR Delete - A Kit to remove the EGR (Exhaust Gas Recirculation) Valve ONLY, leaving the EGR / Exhaust Cooler in place
• EGR & Cooler Delete - A complete kit that removed both the EGR (Exhaust Gas Recirculation) Valve & the EGR Cooler / Exhaust Cooler

OUR EGR DELETE KIT CONSISTS OF:

• Darkside Developments Double Flange Race Pipe
• Machined Cap (For Cooler Pipe)
• 4 x M6 x 20mm BZP Bolts
• Vented Grub Screw (Boost Guage Takeoff)
• Grub Screw (to block Boost Port)
• 2 x Water Pipe Blanks (With Cooler Delete)
• 2 x Mikalor Clamps (With Cooler Delete)
• Small EGR Blanking Plate (With Cooler Delete)
• 2 x Cap Head Bolts (With Cooler Delete)