Toyota Hilux Prado 3.0 D4D Diesel EGR Blanking Plate 1KD-FTV
Exhaust Gases Recirculation valve block off plate. This plate is used to prevent engine from stalling. EGR valve is often the cause of all sorts of problems with the engine including flooding the engine. It is a great idea to have the EGR blocked off and then removed with a Remap of your engine ECU. This means your engine works better and becomes cleaner.
NOTE: This is an off-road ONLY modification.
This fits:
- Toyota Hilux KUN16 / KUN26 1KD-FTV 3.0L – 2005–2015
- Toyota LandCruiser Prado KDJ120 / KDJ125 1KD-FTV 3.0L – 2006–2009
- Toyota LandCruiser Prado KDJ150 / KDJ155 1KD-FTV 3.0L – 2009–2015
Toyota Hilux Prado 1KD EGR Blanking Plate - 3.0L D-4D Diesel - Australian Made
Toyota Hilux Prado D4D EGR Blanking Plate 1KD-FTV
Exhaust Gases Recirculation valve block off plate. This plate is used to prevent engine from stalling. EGR valve is often the cause of all sorts of problems with the engine including flooding the engine. It is a great idea to have the EGR blocked off and then removed with a Remap of your engine ECU. This means your engine works better and becomes cleaner. For this item to work correctly it is a requirement to have the vehicle remapped to delete the EGR out of Computer's brains. The tune deletes all the information about the EGR in your car. Your Ranger thinks it no longer has the EGR valve installed. Your Engine will last you longer due to less carbon built up on the intake. The EGR blanking plate for Hliux and Prado is not visible to the dealers when you fit it correctly so they will not be able to notice it.
Euro Car Upgrades can install your EGR blanking plate for you and Remap your Engine ECU to keep it reliable long term and protect the engine from being flooded from EGR valve. We have Dealers Australia wide who can also do this for you.
Scope of delivery:
- 1x 1KD-FTV EGR Blanking Plate
NOTE: Please be aware that in most cars produced after 2000 you have to remap your ECU to switch off EGR valve, blanking it is only half of the process.
NOTE: This is an off-road ONLY modification.
| OEM Part Number | EGRHILUXPRADO |
|---|---|
| Brand | ECE |
| Condition | Brand new |
| ECU Tune required | Yes |
| Country of Manufacture | Australia |
| Rack | 2 |
| Shelf | 3 |
| Shelf side | Front |
This Fits:
| Make | Model | Year |
|---|---|---|
| Toyota | Hilux | 2005 |
| Toyota | Hilux | 2006 |
| Toyota | Hilux | 2007 |
| Toyota | Hilux | 2008 |
| Toyota | Hilux | 2009 |
| Toyota | Hilux | 2010 |
| Toyota | Hilux | 2011 |
| Toyota | Hilux | 2012 |
| Toyota | Hilux | 2013 |
| Toyota | Hilux | 2014 |
| Toyota | Hilux | 2015 |
| Toyota | Prado | 2006 |
| Toyota | Prado | 2007 |
| Toyota | Prado | 2008 |
| Toyota | Prado | 2009 |
| Toyota | Prado | 2010 |
| Toyota | Prado | 2011 |
| Toyota | Prado | 2012 |
| Toyota | Prado | 2013 |
| Toyota | Prado | 2014 |
| Toyota | Prado | 2015 |
Note:
This fits:
- Toyota Hilux KUN16 / KUN26 1KD-FTV 3.0L – 2005–2015
- Toyota LandCruiser Prado KDJ120 / KDJ125 1KD-FTV 3.0L – 2006–2009
- Toyota LandCruiser Prado KDJ150 / KDJ155 1KD-FTV 3.0L – 2009–2015
Installation & Configuration
Professional installation and configuration are available through Euro Car Electronics. If you prefer to have this product professionally fitted, our team can assist with installation and any required vehicle setup.
Enquire about professional installation ↗
An ECU remap is required after installation. Enquire about ECU tuning↗
IMPORTANT: Some products require professional installation or specific installation procedures. Please review the product information and our Warranty Support & Returns ↗ information before installation.