This kit is to completely remove the problematic EGR Cooler on the CFCA Engines. The EGR Cooler on these engines is known to break down internally and cause small particles to enter the engine and score the cylinders bores.

To remove the original EGR Cooler you will need to fit the supplied oil filter housing in place of this, and complete the circuit of two of the EGR Cooler pipes.

• Reduces Inlet Air Temperatures = More Power
• Prevents Inlet and Turbo from Clogging up
• Made in the UK

Scope of delivery:

• 1x Oil Filter Housing Complete with Oil Filter & Heat Exchanger
• 1x Large EGR Blanking Plate
• 1x Small EGR Blanking Plate
• 1x Small EGR Gasket
• 1x 90 Degree Hose Connector
• 2x Jubilee Clamps

Please Note: Once the valve is either removed or blanked off the vehicle's ECU will no longer get a signal from the EGR Valve causing the emissions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.

Please Note: Euro Car Electronics accepts no responsibility for the use of this part on the public roads where removal of emission controls is prohibited. It is the owners responsibility to ensure they comply with rules and laws relating to their home country.