BMW 2.0 & 3.0 M47 / M57 Engine EGR Delete / Race Pipe

This kit replaces the EGR Valve. This can be used if you are wanting to remove the Anti Shudder Valve (ASV) or if the vehicle isn't fitted with one

PLEASE NOTE: THIS KIT IS FOR MODELS WITH THE STOCK ALLOY BOOST PIPE. YOU MUST CHECK THIS BEFORE ORDERING THIS ITEM

If you have the plastic boost pipe, we have another kit listed. The link is below in this listing.
Our unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost guage from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install

As our design is almost exactly the same profile as the standard EGR Valve, which allows all the stock fixings to be used

• Reduces inlet air temperatures = more power
• Prevents inlet and turbo from clogging up
• Brushed aluminium finish
• Made in the UK

Please Note: Once the valve is either removed or blanked off the vehicle's ECU will no longer get a signal from the EGR Valve causing the emissions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.

Please Note: Euro Car Upgrades accepts no responsibility for the use of this part on the public roads where removal of emission controls is prohibited. It is the owners responsibility to ensure they comply with rules and laws relating to their home country.

KIT OPTIONS:

• EGR Delete - A Kit to remove the EGR (Exhaust Gas Recirculation) Valve ONLY, leaving the EGR / Exhaust Cooler in place
• EGR & Cooler Delete - A complete kit that removed both the EGR (Exhaust Gas Recirculation) Valve & the EGR Cooler / Exhaust Cooler

SCOPE OF DELIVERY:

• Darkside Developments Race Pipe
• Machined Cap (For Cooler Pipe)
• 4x M6 BZP Bolts
• Vented Grub Screw (Boost Guage Takeoff)
• Grub Screw (to block Boost Port)

If you select the EGR and Cooler Delete option you will also receive the following:

• 2 x Water Pipe Blanks
• 2 x Mikalor Clamps
• Small EGR Blanking Plate
• 2 x Cap Head Bolts
• 57mm 90 Silicone Hose
• 2 x T-Bolt Clamps

Complete the modification with ECU tuning

The plate handles the physical blanking, while the required ECU calibration addresses EGR operation and monitoring. Installing a plate without suitable calibration can trigger EGR-related fault codes, an engine warning light or limp mode.

If your vehicle still needs this calibration, select the mail-in ECU tuning option above when ordering. This service requires you to send your engine ECU to us. Customers who already have suitable EGR calibration can purchase the plate on its own.

For installation and tuning at our Sunshine Coast workshop, submit an online tuning enquiry with your vehicle details.

Intake cleaning alongside the installation

Blanking the EGR passage does not remove soot and carbon already deposited in the intake manifold. Where deposits are restricting airflow, cleaning the intake can address that existing buildup.

Euro Car Electronics offers intake manifold cleaning, with ultrasonic cleaning available for suitable removed components. Request an intake cleaning assessment to arrange this alongside the work.

Installation and ECU tuning are not included in the plate price. The mail-in ECU tuning service is charged separately when selected.

Frequently asked questions